New pool deck installations and resurfacing for Hernando County homeowners. Slip-resistant finishes, UV-stable color, built for Florida's heat and humidity.
Tell us about your pool deck project — new install, resurfacing, or repair — and we'll follow up with a no-obligation estimate.
Fill out the form below and we'll contact you shortly.
Your pool deck takes more abuse than almost any other concrete surface on your property. In Brooksville and the surrounding Hernando County area, that means intense UV, standing water, pool chemicals, and the ground movement that comes with Florida's karst geology and clay-mixed soils. A pool deck that isn't built or resurfaced correctly shows it within a few seasons — flaking coatings, hairline cracks at the joints, or surface that stays slippery when wet.
At Brooksville Concrete Co., we've been working around residential pools long enough to know what holds up and what doesn't. Broom-finished and exposed aggregate concrete are the most durable long-term options because the texture is in the concrete itself, not a coating applied on top. For homeowners who want a decorative look — pavers or stone appearance — a stamped concrete overlay with a grit-added sealer delivers aesthetics without sacrificing traction.
We form, reinforce, and pour new concrete decking around your pool. Standard residential pool decks are 4 inches thick with fiber mesh reinforcement and properly placed control joints to manage Florida's expansion and contraction cycle. We slope the deck away from the pool coping and toward area drains — critical in Hernando County where the soil doesn't drain as fast as pure sand counties.
If your existing concrete is structurally sound but the surface is worn, discolored, or has a coating that's flaking off, resurfacing is far more cost-effective than a full replacement. We grind or profile the existing surface, fill any active cracks with flexible polyurethane, then apply a spray texture, microtop, or stampable overlay depending on your goals and budget.
Every pool deck project is built with Florida-specific materials and drainage planning from a local crew that knows Hernando County.
We understand coping transitions, pool bond beams, and proper drainage slope to prevent water pooling around the deck edge.
Integral color pigments and sealed surfaces that resist Florida's intense UV without fading or chalking in 2–3 years.
Broom, exposed aggregate, and grit-sealer options that maintain traction even when the deck is wet.
Clear per-square-foot pricing discussed before any work begins. No surprises when the invoice arrives.
We work primarily with homeowners — no commercial site schedules pushing your project to the back of the line.
We understand local soil conditions, drainage requirements, and county permitting for pool deck work in Brooksville.
We visit the site, measure the deck area, assess existing concrete condition, and discuss finish options and budget.
For new installs, we excavate and compact. For resurfacing, we grind the surface, repair cracks, and profile for adhesion.
Forms are set for proper slope and drainage. Fiber mesh or rebar reinforcement is placed before the pour.
Concrete is poured and finished to your selected texture. Control joints are saw-cut at the right time to prevent random cracking.
The deck cures for 7–28 days depending on thickness. We apply sealer with appropriate grit additive for slip resistance.
New driveways, walkway replacements, and concrete flatwork.
Learn More →Outdoor concrete surfaces to extend usable living space.
Learn More →Overlays and coatings to restore worn concrete surfaces.
Learn More →Crack repair, slab lifting, and surface restoration.
Learn More →Decorative patterns that add texture and visual interest.
Learn More →Get a free quote from Brooksville Concrete Co. for pool deck installation, resurfacing, or repair in Hernando County.
📞 Call (352) 292-1499 Request Quote Online